DF-500 – PURE EPOXY RESIN

DymaFix Anchoring Technology

DF-500 is a high performance two component pure epoxy resin anchoring system for use in both cracked and non-cracked concrete. DF-500 has been designed for the most demanding structural applications and rebar connections, offering a very high load bearing capacity

Suitable for applications in:

  • Wet holes and flooded, underwater applications
  • Deep embedment with high load due to longer curing times
  • Large diameter holes as this has no shrinkage
  • Cracked and non-cracked concrete
  • Diamond drilled holes without prior preparation
  • Critical applications
  • Close to edge applications where mechanical anchors could cause cracking
  • Confined spaces and indoors as this is free from styrene
  • Concrete, brick, wood, and other high strength materials

Approvals list:

  • ETA Option 7 (non-cracked concrete) – M8 to M30
  • ETA Option 1 (cracked concrete) – M12 to M24
  • ETA TR023 (post installed rebar) – 8 to 32mm
  • ETA seismic annex E C2 – M16 to M24
  • Fire resistance certificate
  • VOC (volatile organic content): A+ rating

Please click to download: DF-500 Technical Data Sheet

SPECIFICATION CHART
Base Material Temperature Working Time Curing Time
50°C 7 min 7 hr
40°C 15 min 7 hr
30°C 20 min 12 hr
25°C 30 min 14 hr
20°C 50 min 16 hr
15°C 1 hr 10 min 22 hr
10°C 1 hr 40 min 28 hr
5°C 2 hr 30 min 41 hr
0°C 3 hr 20 min 54 hr
Part Number Description
CRT/DF500/470DF-500 Pure Epoxy Chemical Resin, 470 ml Cartridge